X Travel : 300 mm
Y Travel : 200 mm
Z Travel : 300 mm
Max. Machining Current : 50 A
Total Power Input : 4.5 KVA
Best Surface Roughness : 0.20 um Ra
Net Weight : 250 kg
Outside Demensions (WxDxH) : 680x1070x1820
|
|
|
486 PC Based industrial
grade computer to enchance processing time&
highest reliability. |
|
Built-in 8 sets of most optimized
machining datas (Cu-St, Cu-Al, Gr-St, Gr-Al, St-St,
Cu-WC, CuW-Wc & others) for machining different
materials from rough to fine surface finishing
which each set included 32 steps machining choices. |
|
Most advanced "L.W.F."
sparking circuits to decerase the electrode wear,
especially at the sharp corner. |
|
Special "TRACKING MODE "
Off Time Control circuits to prevent arcing. |
|
X Y Z 3 axes moves simultaneously
to machinng high precise, sophisiticated moulds. |
|
Dialogue programming and easy to
operate. |
|
Using "MOSFET" sparking
circuits to enhance performance and get the big
areas of mirror finish easily. |
|
The whole CNC power supply unit
is designed with module boxes to keep simple maintenance
& service. |
|
Dual voltage (high / low voltage)
currents being synchronously discharged allows
faster metal removal rate and uniform surface
finish. |
|
MM / INCH selectable. |
|
All machining parameters can be
modified at any time during sparking and without
affecting the stored memory. |
|
Complete and powerful CNC funtions:
Z axis vertical machining, multi holes machining,
side machining, orbiting machining, 3 axes contour
machining, auto edge finding, auto circle center
finding |
|
Auto electrode changers, C axis
& A axis are available to enhance the fully
automated machining, non-stop, top-performance
production. |
CNC SERIES MACHINE UNIT (JMNC SERIES) |
| ITEM |
UNIT |
JMNC 32A |
| Work
table size |
mm |
600x300 |
| X travel |
mm |
300 |
| Y travel |
mm |
200 |
| Z travel |
mm |
300 |
| Ram
platen to work table |
mm |
167~467 |
| Max.
electrode weight |
kgs |
60 |
| Max.
workpiece weight |
kgs |
500 |
| Work
tank (WxDxH) |
mm |
845x510x300 |
| Weight
of machine unit |
kgs |
1150 |
| Outside
dimensions (WxDxH) |
mm |
1675x1200x2075 |
| P SERIES GENERATOR (CNC) |
| ITEM |
UNIT |
P50 |
| Max. Machining Current |
A |
50 |
| Total Power Input |
KVA |
4.5 |
| Max. Metal Removal Rate |
mm3/min |
390 |
| Electrode Wear Ratio |
% |
0.20 |
| Best Surface Roughness |
um Ra |
0.20 |
| Net Weight |
kg |
250 |
| Outside Demensions (WxDxH) |
mm |
680x1070x1820 |
*All Specifications and design subject to change without notices.
*CE Models are available upon request. |
|
|
