X Travel : 1,300 mm
Y Travel : 1,020 mm
Z Travel : 1050 mm
Spindle Taper : BT#50
Max
Spindle Speed : 8000 rpm
Spindle Motor : 37 / 30 Kw
Tool Changer : Chain type 60 Station
Machine Weight 25,000 Kg
|
Based on Awea’s advance technology, aiming for multi process high precision machining, AH-400 was created. High rigidity symmetric structure, 12,000 rpm built-in spindle, high accuracy rotary axes pallet, 48 m/min three axes rapid achieves high speed, high accuracy and heavy cutting in one machine. This meets the stringent quality requirements of automobile crank case, engine block, and high accuracy components machining. |
AH-800 Series
| Models |
AH-400 |
AH-800 |
| Max. X / Y / Z axes travel |
500 / 500 / 600 mm |
1,300 / 1,020 / 1,050 mm |
| Dist. from spindle nose to table |
125 ~ 725 mm |
100 ~ 1,250 mm |
| Dist. from spindle center to table |
50 ~ 550 mm |
150 ~ 1,200 mm |
| Max. Spindle speed |
12,000 rpm |
8,000 rpm |
| Spindle motor output |
22 / 18.5 Kw |
37 / 30 Kw |
| Spindle taper |
BT#40 |
BT#50 |
| Table size / Number |
400 x 400 mm / 2 |
800 x 800 mm / 2 |
| Max. table load |
400 x 2 Kg |
1,000 x 2 Kg |
| Rotating speed of B-axis |
16.7 rpm |
10 rpm |
| X / Y / Z axes rapids |
48 m / min. |
30 m / min. |
| Max. tool diameter / Adjacent |
80 / 150 mm |
125 / 250 mm |
| Tool magazine capacity |
Disk Type 60 Station |
Chain type 60 Station |
| Dimensions ( L × W × H ) |
4,800 x 2,100 x 2,450 |
7,000 x 4,170 x 3,700 mm |
| Machine weight |
11,500 Kg |
25,000 Kg |
| * Specifications are subject to change without notice. |
|
